Amana Tool RC-2267 CNC Insert Carbide 3 Wing/Flute Heavy Duty Spoilboard Plunging, Surfacing, Planing, Flycutter & Slab Leveler 1-3/4 Dia x 3/4 x 1/2 Shank Router Bit
- Insert carbide spoilboard surfacing & chamfering router bit, great for planing large surface areas. Perfect for removing fine layers of materials. Higher number of teeth allows for higher feed rate.
- Also suitable for router sled machines.
- Warning: Make sure that your router sled rails are fully stable and squared.
- Perfect for:
- Resurfacing spoilboards using CNC
- Planing large glued up panels using CNC
- Surfacing and finishing wood using timber slab machines
- Rabbeting or slotting
- Designed for planing & chamfering the following materials:
- MDF
- Fiberboard
- HDF/LDF
- Balsa Core
- Epoxy (Epoxy Resins)
- High Density Urethane (HDU Board)
- Plastic/Acrylic**
- Plywood/Chipboard
- Hardwood/Softwood
- Ultra-High-Molecular-Weight Polyethylene (UHMWPE)
- ** Use lower CNC spindle RPM and adjusted feed-rate to prevent Melting and adhesion of the acrylic material to the tool.
- Featuring:
- 4-sided solid carbide insert knives
- Exclusive carbide grade for highest quality of cut
- Maximum cutting efficiency
- Faster material removal process
- Tool can plunge up to a maximum depth of 6mm (1/4"), then start resurfacing
- Tool capable of removing very thin layers of material, less than 0.001" per pass
- The unique chamfer corner insert design, creates a flawless surface.
- The 3 wing design, resulting in a more balanced tool while running.
- These industrial router bits feature solid carbide insert knives with four cutting edges that allow users to rotate the knife when one side becomes dull providing the highest-quality finish available on woodworking tools.
- Proper torques rating to tighten down screws is 2-3Nm Torques.
- Vectric and Fusion 360 compatible tool files for RC-2267 available for download, click here.
- Included MDF Knives (3 Required)
- Optional Solid Wood Diamond-Like Carbon (DLC) Knives (3 Required)
- Torx Screw (3)
- Torx Key
- RCK-453
- RCK-453-DLC
- 67110
- 5005
- Heavy Duty Spoilboard 3 & 5 Wing Router Bit Speed and Feed Chart
More Information
| Cutting Diameter |
1-3/4 |
| Shank |
1/2 |
| Cutting Length |
3/4 |
| Overall Length |
2-15/64 |
| (d1) |
1-21/64 |
| (D2) |
5/64 |
| Number of Flutes |
3 |
| Maximum RPM |
22000 |
| (B1) |
3/16 |
