Amana Tool RC-1126 CNC Ball End Insert Carbide 1/2 Radius x 1 Inch Dia x 1/2 x 1/2 Shank
- Cut channels for pipes or cables using the ball end bit. The profile requires the cut to be made in a single pass. To reduce stress on the bit, cut an initial groove using a straight bit matching the D1 dimension of the ball end bit.
- Note: Profile is useful as a ‘conduit’ for cables pipes etc.
- Maximum RPM 18 000.
- Warning: These tools have an open flute design (not anti-kickback) and are intended for high feed-rate CNC machine use only. Do not use in portable routers.
- Vectric compatible tool file for RC-1126 available for download, click here.
- Tool No.
- Screw
- T.C Knife
- RC-1126
- 67115
- RCK-54
- Insert Carbide Ball End Speed and Feed Chart
| Radius 1 (R1) | 1/2 |
|---|---|
| Cutting Diameter | 1 |
| Shank | 1/2 |
| Cutting Length | 15/16 |
| Overall Length | 2-7/8 |
| (d1) | 43/64 |
| Number of Flutes | 2 |
| Maximum RPM | 18000 |
