Amana Tool 47644 10mm Shank Dowel Drill/Boring Bit Adapter for CNC Standard Collet/Tool Holder
- Made especially to run 10mm shank dowel drills and boring bits on a CNC machine. Accommodates the flat area on the 10mm round drill bit shank, secure with the 2 set screws (M6), same method as on boring machines.
- Total Indicated Run-out (TIR) is 0.00118" (0.03mm)
- Note: When securing drill bit into the adapter, make sure to align the flat part of the shank with both set screws.
- Warning: Max RPM = 10,000
- M6 X 5 Screw (2 Required)
- Torx Key
- 5004
| Cutting Diameter | 3/4 |
|---|---|
| Shank | 10mm |
| Overall Length | 2-5/32 |
